Skip to Content
CONTINENTAL GT3 PIKES PEAK – TECHNICAL DETAILS REVEALED

CONTINENTAL GT3 PIKES PEAK – TECHNICAL DETAILS REVEALED

  • Continental GT3 Pikes Peak powers through dynamic testing
  • Race engine completes prove-out phase using renewable fuel
  • More than 750 bhp in testing and 1000 Nm from reworked 4.0-litre V8
  • 30 per cent more downforce than standard Continental GT3
  • Revised chassis, water-cooled brakes and 3D-printed parts
  • Bentley bids for triple crown of Pikes Peak records
  • Targeting Time Attack 1 record, to add to Production SUV and Production Car records attained in 2018 and 2019
  • Car developed in conjunction with GT3 customer team Fastr
  • Pikes Peak International Hill Climb to take place on 27 June 2021

Bentley’s Continental GT3 Pikes Peak racer is now in final preparations for the world’s most demanding and famous hill climb competition, having completed three dynamic test sessions and renewable fuel engine development.

 

The most extreme road-going Bentley ever built, the car represents another strand of Bentley’s ambitious and transformational Beyond100 programme, which will see the brand become the world’s leading sustainable luxury mobility company.

 

For its assault on Pikes Peak on 27 June, the car will run on renewable fuel, initiating a research and development programme that aims to offer renewable fuels to Bentley customers in parallel to Bentley’s electrification programme. This two-strand strategy is set to maximise the pace of Bentley’s progress towards outright carbon neutrality, as part of its Beyond100 journey.

Continental GT3 Pikes Peak – Technical Details

With the start line at 9,300 ft, the course climbs to 14,100 ft - where the air is a third less dense than at sea level. This environment means that the Continental GT3 Pikes Peak features modifications to its aerodynamics package, its chassis and its engine, turning it into the most extreme iteration of a Continental GT – or indeed any Bentley road car – ever.  

The engine – based on Bentley’s race-proven version of its 4.0-litre twin-turbo V8 road car engine – has been thoroughly reworked to generate more than 750 bhp and 1,000 Nm at sea level for testing – and the engine will run even higher power levels for the race itself New pistons and conrods are installed to turn additional boost pressure (over 2.2 bar) into power, having to handle an increased dynamic pressure ratio. The carbon fibre intake manifold is thicker and reinforced versus the standard item, for the same reason. Custom, one-off titanium exhaust manifolds have been 3D-printed via laser sintering by Akrapovic, and lead to larger turbos paired with external wastegates, venting into very short exhausts and dedicated screamer pipes that exit behind the front wheels.             

The engine runs on 98RON Renewable Racing Fuel. The fuel is a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85 per cent. 

The high performance engine places additional demands on the cooling system, and for Pikes Peak the engineering team have developed a secondary cooling system that’s installed at the back of the car. Air scoops replace the rear windows, and channel air through a secondary radiator that exhausts through ducts in the boot lid. The system runs via a dedicated secondary water pump.

The gearbox is Bentley’s standard racing unit, already designed to handle the torque loads involved, but rear driveshaft diameter has been increased to provide additional durability. The gearbox runs a specially-formulated lubricant created specifically for the car by Mobil1, who have also supplied high-performance oil for the engine.

The chassis has been set up and tuned to suit the specific nature of the Pikes Pikes course. Both front and rear axles run significantly reduced camber to the standard Continental GT3 setup, focusing the car on low-speed cornering performance. The softest springs and anti-roll bars from Bentley’s range have been fitted, to allow more movement in the body and so maximise weight transfer for braking. The brakes themselves are water-cooled, to handle the increased loads that an all-out attack on the course will bring.       

The aerodynamic modifications sees a 30 per cent increase in overall downforce at sea level, while maintaining the standard car’s aerodynamic front / rear balance – validated during the first track sessions. The biggest rear wing ever fitted to a Bentley dominates the rear of the car, sitting above a highly efficient rear diffuser that surrounds the transaxle gearbox. To maintain the aerodynamic balance front-to-rear, these devices are paired with a comprehensive front-end aerodynamic package comprising a two-plane front splitter flanked by separate dive planes. The majority of these parts were made with carbon nylon filament using rapid prototype, additive manufacturing techniques at the Bentley factory in Crewe.

The car is now resplendent in its race livery, which combines the black-and-gold theme of Roger Clark Motorsport (that runs the car in the UK) with Bentley’s instantly-recognisable Pikes Peak mountain graphic that featured on the Pikes Peak variants of the Bentayga and Continental GT.

An Extraordinary Team for a Triple Crown Attempt

Bentley’s pinnacle Pikes Peak project – its bid for the third and final part of a triple crown - is being run in conjunction with British Continental GT3 customer team Fastr, who have successfully campaigned their Bentley race car in time attack competitions across the country. Technical teams from Bentley and Fastr have worked together with specialists from M-Sport in Cumbria to extract the maximum possible performance from the Continental GT3 package, which will be run in Colorado by the same team.  

Two parallel testing programmes have yielded promising results over recent weeks. On arrival in the USA, the Continental GT3 Pikes Peak was immediately put through its paces with two chassis set-up development tests at Willow Springs. High altitude testing then took place in Aspen, Colorado, focusing on engine performance and calibration. Meanwhile, back at the base of M-Sport in Cumbria, a development engine has been running on a high-load test bed, evaluating the performance of the renewable fuel selected by Bentley for the event – with powerful, reliable results.   

To break the record, the car will have to complete the nearly 5,000 ft climb, which includes 156 corners, at an average speed of more than 78 mph to cross the finish line in less than nine minutes and 36 seconds. Three-time Pikes Peak champion and former “King of the Mountain’ Rhys Millen (NZ) returns to drive, having captured Bentley’s two existing Pikes Peak records – the Production SUV record attained in 2018 with a Bentayga W12, and the outright Production Car record scored in 2019 with a Continental GT.    

The Continental GT3 Pikes Peak continues its final testing and development activities over the next two weeks, ahead of the 99th running of the Pikes Peak International Hill Climb on 27 June.

- ENDS -

 

Notes to editors

Bentley Motors is the most sought-after luxury car brand in the world. The company’s headquarters in Crewe is home to all of its operations including design, R&D, engineering, Mulliner and production of the company’s three model lines, Continental, Flying Spur, and Bentayga. The combination of fine craftsmanship, using skills that have been handed down through generations, alongside engineering expertise and cutting-edge technology is unique to UK luxury car brands such as Bentley. It is also an example of high-value British manufacturing at its best. Bentley employs around 4,000 people at Crewe.

Contact us
Bernard Van Bellingen PR Manager, Bentley - Bugatti - Lamborghini
Bernard Van Bellingen PR Manager, Bentley - Bugatti - Lamborghini
About Bentley Brussels

In existence since 1805, and across family generations, D’Ieteren seeks growth and value creation by pursuing a strategy on the long term for its businesses and actively encouraging and supporting them to develop their position in their industry or in their geographies. The Group has currently three activities articulated around strong brands:

 

D'Ieteren Automotive distributes Volkswagen, Audi, SEAT, Škoda, Bentley, Lamborghini, Bugatti, Porsche and Yamaha vehicles in Belgium. It is the country's number one car distributor, with a market share of around 21% and 1.2 million vehicles on the road. Sales and adjusted operating result reached respectively EUR 3.4 billion and EUR 113.0 million in 2018.

 

Belron (54.10% owned) has a clear purpose: “making a difference by solving people’s problems with real care”. It is the worldwide leader in vehicle glass repair and replacement and operates in 35 countries, through wholly owned businesses and franchises, with market leading brands – including Carglass®, Safelite® and Autoglass®. In addition, Belron manages vehicle glass and other insurance claims on behalf of insurance customers. It has also expanded its services into the automotive damage and home damage repair and replacement markets. Sales and adjusted operating result reached respectively EUR 3.8 billion and EUR 225.7 million in FY 2018.

 

Moleskine (100% owned) is a premium and aspirational lifestyle brand which develops and sells iconic branded notebooks and writing, travel and reading accessories through a multichannel distribution strategy across more than 115 countries. Sales and operating result reached respectively EUR 174.1 million and EUR 28.6 million in FY 2018.


© 2021 D'Ieteren Group SA/NV. All rights reserved.

Legal Notice :  https://www.dieteren.be/media/11xbtwkq/informations-l%C3%A9gales_en.pdf


Bentley Brussels
Grote Baan 399, Grand Route
B-1620 Drogenbos